Dry Stack Stone Veneer
Until now, dry stack natural stone has required a skilled mason and plenty
of time. But our new dry stack veneer panels mean quick DIY installation
and a professional finished look. The pre-assembled panels are 100% natural
stone strips, bonded together with epoxy. Unlike fake or "cultured" stone
veneers, which are made out of colored cement, natural stone will not
fade and every piece is unique, with natural mineral texture and colors.
(Click on the images below for a larger view)
Each panel is 24" x 6", and only about 1" thick, which means they are
less than 15 lbs/sf and meet UBC and IBC codes for mounting on stud walls
without mechanical anchorage. Simply mud-set the panels on metal lath
screwed to concrete backer-board, stagger the joints, and the seams between
the panels disappear. Because you are working with exactly sized panels,
there is no individual fitting of stones or large grout seams to fill
gaps. Panels can be trimmed to length on an ordinary tile saw with a
diamond blade.
We also have corner pieces that wrap 6" around corners or into the firebox.
The corners are made from thick stones, cut from behind into a L shape,
not mitred or glued.
Contact Us today for more information on any of our stones.
|
Sage Green
Photo courtesy of Robert McDirmid
There are four colors available, to fit any decor:
Colonial Gray - goes perfectly with a bluestone hearth.
Desert Gold - southwestern colors complemented by light colored hardwoods like oak or maple;
Multi-Slate - dark rich tones work well with mahogany, cherry and dark stains;
Sage Green - a fresh gray-green with sparkling mica crystals, set
off beautifully by white walls.
|
